Welcome, visitor!   Login

Menu Post an Ad

Centrifugal Pump Head, 5 HP Required, 1-1/2 Inlet (In.), 1-1/4 Outlet (In.)

Centrifugal Pump Head, 5 HP Required, 1-1/2 Inlet (In.), 1-1/4 Outlet (In.)

Item Details:

  • Company Name: W.W. Grainger, Inc.
  • Street: 100 Grainger Parkway
  • City: Lake Forest
  • State: Illinois
  • Country: United States of America
  • Zip/Postal Code: 60045-5201
  • Expires: 60 days, 18 hours

Email to a friend

← Go Back
  • Item listed by: on 2017-07-23

    Item Description:

    This pump is designed for use where high heads are needed to handle liquid transfer, such as heating and cooling operations, where no suction lift is required. It operates at speeds up to 4000 rpm, and features durable, permanently lubricated, sealed ball bearings, a 3/4″-dia. 316 stainless steel shaft, and Type 21 Viton® mechanical seals. It’s suitable for use in chemical processing, liquid transfer, pressure boosting, and circulating heated or chilled water. The motor is sold separately.
    • Mfr. Model # 10X672
    • Catalog Page # 2704
    • UNSPSC # 40151503

    TECHNICAL SPECS

    • Item: Centrifugal Pump Head
    • HP Required: 5
    • Inlet (In.): 1-1/2
    • Wetted Materials: Cast Iron SUS316,Carbon, Ceramic, 304 SS, Viton
    • Impeller Material: 316 SS
    • Housing Material: Cast iron
    • Seal Material: Carbon, Ceramic, Viton, Stainless Steel
    • GPM of Water @ 5 Ft. of Head: 105
    • GPM of Water @ 10 Ft. of Head: 104
    • GPM of Water @ 15 Ft. of Head: 102
    • GPM of Water @ 20 Ft. of Head: 101
    • GPM of Water @ 30 Ft. of Head: 96
    • GPM of Water @ 40 Ft. of Head: 93
    • GPM of Water @ 50 Ft. of Head: 88
    • GPM of Water @ 60 Ft. of Head: 82
    • GPM of Water @ 70 Ft. of Head: 75
    • GPM of Water @ 80 Ft. of Head: 68
    • Max. Specific Gravity: 1.0
    • Impeller Type: Closed
    • Bearing Type: Ball
    • Duty: Continuous
    • Manufacturers Warranty Length: 1 Year
    • For Use With: Clear, Non-Abrasive, Non-Flammable Liquids Compatible with Pump Components
    • Best Efficiency GPM @ Head: 68 @ 80 ft.
    • Height: 9″
    • Inlet: 1-1/2″
    • Inlet Pressure: 92 psi
    • Length: 12-1/8″
    • Max. Case Pressure: 150 psi
    • Max. Dia. Solids: 1/8
    • Max. Head: 135 ft.
    • Max. Pressure: 58 psi
    • Outlet: 1-1/4″
    • Width: 8-3/8″

    COMPLIANCE AND RESTRICTIONS

    None

    No Tags

      

    Listing ID: 8175989df3008c07

    Report problem

    Processing your request, Please wait....

    Verified user

    Sponsored Links

    Related Ads

    Some other ads that you might be interested in...

    Pedestal Pump, 3 HP Required, 2 Inlet (In.), 1-1/2 Outlet (In.)

    Pedestal Pump, 3 HP Required, 2 Inlet (In.), 1-1/2 Outlet (In.)

    Dayton unit was made to pump continuously, producing high flow rates under low-head conditions. Designed for continuous low pressure circulation and transfer of liquids, utility […]

    2017-07-23

    Pedestal Pump, 1/3 HP Required, 1 Inlet (In.), 3/4 Outlet (In.)

    Pedestal Pump, 1/3 HP Required, 1 Inlet (In.), 3/4 Outlet (In.)

    Dayton unit was made to pump continuously, producing high flow rates under low-head conditions. Designed for continuous low pressure circulation and transfer of liquids, utility […]

    2017-07-23

    Featured Stainless Steel 1-1/2 HP Centrifugal Pump, 3 Phase, 208-230/460 Voltage

    Stainless Steel 1-1/2 HP Centrifugal Pump, 3 Phase, 208-230/460 Voltage

    Dayton close-coupled units pump continuously, producing high flow rates under low-head conditions. Designed for continuous low-pressure circulation and transfer of nonflammable liquids, utility, boiler feed, […]

    2017-07-23

    Leave a Reply

    You must be logged in to post a comment.

    Listing Opportunities

    Featured Tender

    Innovative Solutions

    error: Content is protected !!